Raymarine e7 - 3.11 Editing information in dialogs

1
3
D12 27 9-1
2
ScreenitemDescription
1
Status—providesstatusinformationfortheconnected
equipment.Forexample,thePilotControldialogdisplays
thelockedheadingandcurrentnavigationmodefora
connectedautopilotunit.
2
Controlicons—providedirectcontroloftheconnected
equipment.Forexample,thePilotControldialogStandby,
AutoandTrackiconsenableyoutoinstructaconnected
autopilotunittoperformspecicfunctions.
3
Dismiss—Closesthecontroldialog.
3.11Editinginformationindialogs
Withthedialogdisplayed:
1.Selecttheeldyouwanttoedit.
Theon-screenkeyboardisdisplayed:
2.Usetheon-screenkeyboardtomakethechanges.
3.Usetheon-screenkeyboard’sSAVEkeytokeepanychanges.
Enteringspecialoraccentedcharacters
Withtheon-screenkeyboarddisplayed:
1.Selecttheon-screenkeyboard’sàèòkey.
2.Selectthecharacteryouwanttoaccent.
Theavailableaccentedcharactersaredisplayedabovethetext
entryeld.
3.Forcharactersthathavemultipleavailableaccents,usethe
characterkeytotogglebetweenthem.
4.Selecttheàèòkeytoenterthecharacter.
Gettingstarted
41