Raymarine e7 - 6.4 Chart context menu

6.4Chartcontextmenu
Placingthecursoroveranareainthechartapplicationdisplaysa
contextmenushowingthecursorspositionaldataandmenuitems.
Thechartcontextmenucanbeaccessedbythefollowingactions:
•SelectanareaonthechartusingtheJoystickandpressthe
Okbutton.
•SelectachartobjectusingtheJoystickandpresstheOkbutton.
•Selectandholdonanareaonthechartusingtouch—
Hybridtouchmultifunctiondisplaysonly.
•Selectachartobjectusingtouch—Hybridtouchmultifunction
displaysonly.
•Selectandholdonachartobjectusingtouch—Hybridtouch
multifunctiondisplaysonly.
Themethodofselectingachartobjectusingtouchdependson
theContextMenusettinginthechartSet-upmenu,whichcan
besettoT ouchorHold.
Thecontextmenuprovidesthefollowingpositionaldataforthe
cursorpositioninrelationtoyourvessel:
•Latitude
•Longitude
•Range
•Bearing
Thefollowingmenuitemsareavailable:
•GotoCursor/StopGoto/StopFollow
•PlaceWaypoint
•ChartObjects
•FindNearest
•Measure
•BuildRoute
Thefollowingoptionsareavailablewhenacurrentortidestation
isselected:
•CurrentStation/TideStation
•Animate
Selectingcontextmenusettings
Youcanchoosehowchartobjectcontextmenuisaaccessedusing
touch.
Fromthechartapplication:
1.SelectMenu.
2.SelectSet-up.
3.SelectContextMenutoswitchbetweenT ouchorHold.
•Hold—requiresyoutotouchandholdonachartobjectto
accessthecontextmenu.
•T ouch—requiresyoutotouchachartobjecttoaccessthe
contextmenu.
96e7/e7D—Userreference