Raymarine e7 - 7.1 Autopilot control

7.1Autopilotcontrol
Youcanuseyourmultifunctiondisplaytocontrolyourautopilot.
Note:Forinformationonconnectingyourmultifunctiondisplay
toaRaymarineautopilotsystem,refertothedocumentationthat
accompaniedyourautopilot.
WiththeAutopilotControlfunctionenabled,youcanuseyour
multifunctiondisplayto:
•Engagetheautopilotandinstructittofollowaroute,orawaypoint.
•Disengagetheautopilot.
•Silencethewaypointarrivalalarm.
PilotControldialog
1
2
3
5
4
6
7
10
9
8
D12 20 6-1
ItemDescription
1PilotMode.
2
CurrentLockedHeading.
3
STANDBY—Disengagestheautopilotandreturntomanualvessel
control.
ItemDescription
4Auto—Engagestheautopilot.
5
Turnangle—TheturnangleisonlyavailableforSPXautopilots
connectedusingSeaTalk
ng
.Thisindicatesthedirectionandseverityof
turnstobemadeunderautopilot.
6Track—EngagestheautopilotinTrackmodeandautomaticallysteers
yourvesselalongarouteplottedonyourchartplotter.
7
Dismiss—DismissesthePilotControldialog.
8Distancetonextwaypoint.
9Bearingtonextwaypoint.
10Nextwaypointname.
Note:ThePilotControldialogwillcloseifnoactionistaken
for10seconds.
ThePilotControldialogisdisplayedinthefollowingsituations:
•WhenyouselectMenu>Navigate>GotoWaypoint,Goto
CursororFollowRouteoptioninthechartapplication.
•WhenyouselectGotoWaypointorGotoCursorusingthechart
contextmenu.
•Whenyouplacethecursoroveranactiverouteorwaypoint
onthechartandselectStopGoto,StopFolloworAdvance
Waypointfromthecontextmenu.
•Whenyouarefollowingarouteorgoingtoawaypointorcursor
position,andselectMenu>Navigate>StopGoto,StopFollow,
orAdvanceWaypoint.
•Whenyouarriveatatargetwaypoint.
120e7/e7D—Userreference