Fromthechartorradarapplication:
1.Selectthewaypoint.
Thewaypointcontextmenuisdisplayed.
2.SelecttheGotoWaypoint.
Note:WithanactivewaypointselectedyoucanselectStop
Gotooptionfromthewaypointcontextmenuatanytimeto
canceltheaction.
Navigatingtoawaypointinthewaypointslist
Fromanyapplication:
1.PresstheWPTbutton.
Thewaypointmenuisdisplayed.
2.SelectViewWaypointList.
Thewaypointslistisdisplayed.
3.Selecttherequiredwaypoint.
Thewaypointoptionsdialogisdisplayed.
4.SelectGotoWaypoint.
Note:PressingtheWPTbuttonfromthehomescreenwilldisplay
thewaypointslist.
Cancellingnavigationtoawaypoint
Fromthechartorradarapplication:
1.Selecttheactivewaypoint.
Thewaypointcontextmenuisdisplayed.
2.SelectStopGoto.
3.Alternatively,inthechartapplication,goto:Menu>Navigate
>StopGoto.
Note:Oncenavigationisnolongeractive,thewaypointsymbol
returnstoitsnormalstate,andthedashedlinebetweenyour
vesselandthewaypointisremoved.
Arrivingatawaypoint
Asyourvesselapproachesawaypoint,thewaypointarrivalalarm
providesawarning.
1.SelectOkonthewaypointarrivalalarmpopupmessage.
Oncethealarmisacknowledged,thenextwaypointisselected,and
thedisplayupdatestoindicatethenextlegoftheroute.
Note:Youcansettheapproachdistance(radius)atwhichthe
waypointarrivalalarmwillsoundusingtheAlarmsmenufromthe
homescreen:Set-up>Alarms>WaypointArrival.
68e7/e7D—Userreference
To Next Page
Loading...
