Raymarine e7 - Page 76

9.SelectFollowtoimmediatelyfollowtheroute.or
10.SelectEdittochangetheroutenameorchangetheroutecolor.
or
11.SelectExittosavetherouteandreturntothechartapplication.
Note:Ifyouplaceawaypointatthewrongposition,selectUndo
Waypoint.
Buildingarouteusingthewaypointlist
Fromthechartapplication:
1.SelectMenu.
2.SelectNavigate.
3.SelectBuildRoute.
Thebuildroutemenuisdisplayed.
4.SelectUseWPTList.
Thewaypointlistisdisplayed.
5.Selecttherequiredwaypoint.
Youwillbetakenbacktothebuildroutemenu.
6.Addsubsequentwaypointstotheroute.
Therouteissavedanddisplayedaseachwaypointisplaced.
7.WhenyourrouteiscompleteselectFinishBuild.
Thenishroutebuildpopupmessageisdisplayed.
8.SelectFollowtoimmediatelyfollowtheroute.or
9.SelectEdittochangetheroutenameorchangetheroutecolor.
or
10.SelectExittosavetherouteandreturntothechartapplication.
Note:Ifyouselectthewrongwaypoint,selectUndoWaypoint
fromtheroutemenu.
Adjustingchartrangewhilebuildingaroute
FromtheBuildRoutemenu:
1.SelectAdjustRange.
2.UsetheRangeControltorangeinandoutofthechart.
Buildaroutefromatrack
Youcancreatearoutefromarecordedtrack.
Whenatrackisconvertedthesystemcreatestheclosestroute
throughtherecordedtrack,usingtheminimumnumberof
waypoints.Eachwaypointcreatedwillbesavedwiththedepthand
temperaturedata(ifapplicable)forthatposition.
D
117 52 -2
Note:Ifatrackbreakoccurs,onlythelastsegmentisconverted
toaroute.
Buildingaroutefromatrack
FromtheTrackList:
•accessedfromthehomescreen:MyData>TrackList
•accessedfromthechartapplication:Menu>MyData>Track
List
1.SelecttheTrackyouwanttoconverttoaroute.
Thetrackoptionsdialogisdisplayed.
76e7/e7D—Userreference