Whenfollowingaroutethecontextmenuoptionschangeto:
•StopFollow
•RestartXTE
•AdvanceWaypoint
•InsertWaypoint
•EditRoute
•EraseRoute—Disabled
•AddRouteLeg
Navigatingaroute
Youcanfollowanyroutestoredonthedisplay.Whenfollowing
arouteyouvisiteachwaypointinorder.Youmayalsousethe
followrouteoptionsinconjunctionwithacompatibleautopilotto
automaticallynavigatealongyourchosenroute.
Thereareanumberofwaystoselectthefollowrouteoption:
•Usingastoredroutewithintheroutelist.
•Fromaselectedwaypointoranylegwithinaroute.
Youcanalsofollowanyrouteinreverseorder.
Followingastoredroute
Fromthechartapplication:
1.SelectMenu.
2.SelectNavigate.
3.SelectFollowRoute.
TheRoutelistisdisplayed.
4.Selecttherouteyouwanttofollow.
5.SelectFollowRoute.
Cancellingnavigationofaroute
Fromthechartapplication:
1.SelecttheRoute.
Theroutecontextmenuisdisplayed.
2.SelectStopFollow.
Arrivingatawaypoint
Asyourvesselapproachesawaypoint,thewaypointarrivalalarm
providesawarning.
1.SelectOkonthewaypointarrivalalarmpopupmessage.
Oncethealarmisacknowledged,thenextwaypointisselected,and
thedisplayupdatestoindicatethenextlegoftheroute.
Note:Youcansettheapproachdistance(radius)atwhichthe
waypointarrivalalarmwillsoundusingtheAlarmsmenufromthe
homescreen:Set-up>Alarms>WaypointArrival.
Advancingtothenextwaypointinaroute
Youcanskipthecurrentactivewaypointandadvancetothenext
waypointinarouteatanytime.
Whilefollowingarouteinthechartapplication:
1.Selecttheroute.
Theroutecontextmenuisdisplayed.
78e7/e7D—Userreference