Raymarine e7 - Page 82

Note:Ifthepowerfailswhilstatrackisbeingrecordedorthe
positionxislost,abreakwilloccurinthetrack.Onlythelast
segmentofatrackcanbeconvertedintoaroute.
Note:Ifthemaximumnumberoftrackingpointsisreached,you
willbewarned.Thetrackwillcontinuetoberecordedwiththe
earliertrackingpointsbeingoverwritten.
5.TocompleteyourtrackselectStopTrackfromtheNavigate
menu:Menu>Navigate>StopTrack.
Thetrackstoppedpopupmessageisdisplayed.
6.SelectSave,EraseorCancel.
•Save—WillsavethetrackandopentheEdittrackProperties
dialogwhereyoucannamethetrackandchooseacolorfor
thetrackline.
•Erase—Willerasethetrack.
•Cancel—WillcanceltheStopTrackaction.
Trackinterval
Thetrackintervalspeciesthetimeperiodordistancebetween
thepointsinatrack.
Youcanadjusttheintervalbetweenpointswhichcanhelpensure
bestuseoftheavailablestorage.
ThesettingsareavailablefromtheMyDatamenu:
•RecordTrackBy—speciestheintervaltype(Auto/Time/
Distance).
•TrackInterval—speciestheintervalvalue(e.g.15minutes).
Forexamplewhencreatingatrackforalongjourney,aninterval
settoAutocouldresultinrapiduseofallofthestorageavailable
fortrackpoints.InthiscaseselectingahighervaluefortheTrack
Intervalwouldprovidecapacityforalongertrack.
Settingthetrackinterval
Fromthechartapplication:
1.SelectMenu.
2.SelectMyData.
3.SelectTrackSet-up.
4.SelectRecordTrackByandsettotheappropriatevalue:
•Auto—Thetrackintervalisautomaticallyset(Autowill
minimizetrackpointswhilstmaintainingcorrelationbetween
thetrackandtheactualpathfollowed).
•Time—Thetrackpointsareplacedatregularintervalsoftime.
•Distance—Thetrackpointsareplacedatregularintervalsof
distance.
5.SelecttheTrackIntervalandsettotheappropriatevalue:
•Unitsoftimefromthelistdisplayed(availableif“recordtrack
by”issettotime).
•Unitsofdistancefromthelistdisplayed(availableif“record
trackby”issettodistance).
•Notavailable—noTrackIntervalisavailableifthe“record
trackby”issettoauto).
82e7/e7D—Userreference