Raymarine E70532 - Pairing a Quantum Radar Scanner

P
airingaQuantum™radarscanner
Y oucanconnectaQuantum™radarscannertoyourdisplayusingtheWi-Fi
connection.
Pre-requisites:
•EnsureyouhaveinstalledandconnectedyourQuantum™radarscannerto
apowersupplyfollowingtheinstructionssuppliedwiththeradarscanner.
•EnsureyouknowyourQuantum™radarscanner’sSSIDandpasscode.
1.Select[P airwithQuantum]fromthe[Thisdisplay]tab:[Homescreen>
Settings>Thisdisplay>QuantumRadar:>PairwithQuantum].
2.EntertheSSIDandpasscodeforyourQuantum™radar.
3.Select[Connect].
4.FollowanyonscreeninstructionstocontinuepairingwithyourQuantum™
radar.
Thepairingprocessmaytakeseveralminutestocomplete.
FormoreinformationontheQuantum™radarpairingprocess
(includingtroubleshootinginformation),refertoyourQuantum™radar
documentation.
38