Raymarine E70532 - AIS Targets List; AIS Settings

AISvectorscanbeenabledanddisabledusingthe[AISvectors]toggle
switch.
T
argetvectorscanbeenabledanddisabledforindividualtargets:Pressand
holdonanAIStargettodisplaythecontextmenu,andthenselect[Vector].
Thevectorscanbesetto[True]or[Relative].
T
ruevectors
Intruemodethevectorsareshownground
referenced(i.e.:theiractualpathover
ground).
Relativevectors
Inrelativemodethevectorsareshown
relativetoyourvessel’sposition.
AIStargetslist
T rackedAIStargetsarelistedintheAIStargetslist.
TheAIStargetslistcanbeaccessedfromtheChartappmenu:[Menu>
AISTargets].
WhenanAIStargetishighlightedtheLive Viewpanewillpanandzoomto
showtheAIStarget.
WhenanAIStargetisselectedtheAIStargetdetailspageisdisplayed.
AISSettings
SettingsrelatedtoAIScanbeaccessedfromtheTargetSettingsmenu:
[Menu>AIST argets>TargetSettings].
[AIS:]EnablesanddisablesdisplayofAIStargets
intheChartapp
.
Note:
WhendisabledAIStargetsanddetailsare
stillavailableintheAIStargetslist.
[Silentmode(don’ttransmit
myposition:]
Y ourAIShardwarewillnottransmitanydata
wheninsilentmode.InSilentmodeAIS
datacanstillbereceivedfromothervessels.
[Hidestatictargets:]Targetstravellingunder2knotswillbe
hidden,unlessthetargetisdangerousor
becomesdangerous.
[AISvectors:]Enablesanddisablesdisplayofvectorson
AIStargets.
[Vectorsperiod:]Determinesthepredictedpositionofthe
target(andthereforethelengthofthe
vector).
Note:
TheVectorsperiodsettingsalsoapplies
toyourvessel’sCOGvector.
[Referencemode:]
Determineswhethervectorsareshownin
trueorrelativemode.
Chartapp
75