Raymarine E70532 - Page 55

W
aypointdetails
Selectingawaypointfromthelistdisplayscustomizabledetailsforthat
waypoint.Thewaypoint’ slocationisalsodisplayedintheLiveViewpaneon
therightsideofthescreen
Withthewaypointdetailsdisplayedyoucan:
•Editthewaypoint’sName.
Note:W aypointnamescanbeanycombinationofletters,numbers,
symbolsandspecialcharactersandcanincludeupto16characters.
Waypointnamesmustbeunique.
•Changethewaypoint’ ssymbol.
•Assignorchangethewaypointgroup.
•Enternewpositioncoordinatesforthewaypoint.
•Addoreditthewaypointcomment.
Note:W aypointcommentscanbeanycombinationofletters,numbers,
symbolsandspecialcharactersandcanincludeupto32characters.
•Deletethewaypoint.
•P erformaGoto.
•ViewthewaypointintheChartapp.
Creatingawaypointgroup
Tocreateanewwaypointgroupfollowthestepsbelow.
Fromthehomescreen:
1.Select[Waypoints].
2.Select[Newgroup].
3.Enteranameforthegroupusingtheonscreenkeyboard.
4.Select[Save].
Thenewwaypointgroupwillbecomethenewdefaultgroupforallnew
waypoints.
Deletingawaypointgroup
Todeleteawaypointgroupfollowthestepsbelow.
Fromthehomescreen:
1.Select[Waypoints].
2.Select[Delete].
3.SelecttheGroupthatyouwanttodelete.
4.Select[Deleteselected].
5.Select[Yes].
Thewaypointgroupandwaypointsthatareassignedtothatgroupwillbe
deleted.
Creatingawaypointbasedoncoordinates
Y oucanmanuallycreateawaypointbasedonthecoordinatesofthelocation
whereyouwantthewaypointplaced.
Fromthehomescreen:
1.Select[Waypoints].
2.Select[NewWPT].
3.Entertherelevantdetailsintheavailablefields.
4.Chooseawaypointsymbol.
5.Enterthepositioncoordinateswhereyouwantthewaypointplacedby
selectingonthe[Position:]fieldandusingtheonscreenkeypadtoenter
thelatitudeandlongitudeforthelocationwhereyouwantthewaypoint
placed..
W aypoints,RoutesandTracks
55