Raymarine i50 Depth - Page 50

3.UsetheTimerandResetbuttonstosettherun
lengthtotherequiredvalue.
Defaultvalueis1.00,therunlengthcanbesetto
anyvaluebetween0.25and2.5.
4.PresstheTimerandResetbuttonsatthesame
timetocommencetheSpeedRunCalibration
TheCalibrationStatuspageisdisplayed.The
textatthetopofthepagealternatesbetween
START1andtheCalibrationFactorcurrently
applied.
D12455-2
+
Time r
Re s e t
5.Starttheoutwardlegoftherunandasyoupass
thestartpoint,presstheTripbutton,sothepage
showsOUTWARDatthetop.Astherunproceeds,
thedisplayedvaluewillchange.
D12456-2
Trip
6.AttheendoftheoutwardlegpressTripagain.
D12457-2
Trip
ThetextRETURNwillashatthetopofthepage
andthedisplayeddistancefreezes.
Note:Atthispointthedisplayeddistancemaynot
bethesameasthemeasureddistance,dueto
errorsintroducedbytidalow.
7.Turnyourvesselround,startthereturnlegandas
youdoso,presstheTripbuttonsoRETURNstops
ashingandthedisplayedvalueincrements.
D12458-2
Trip
8.Attheendofthereturnleg,presstheTripbutton.
Atthispoint:
•ThetextSTART2alternatingwiththenew
CalibrationFactordisplayedatthetopofthe
page.
•Thedisplayeddistancefreezes
D12459-2
Trip
Note:Thedisplayeddistanceshouldbeveryclose
totheactual(measured)distanceoftherun.
9.Ifyouaresatisedwiththeresultsoftherst
calibrationrun,presstheSpeedandTripbuttons
atthesametimetosavethenewCalibration
FactorandexittheSpeedRunCalibrationMenu.
10.Ifyouwanttocarryoutasecondcalibrationrun,
presstheTripbutton.
11.Followsteps5to7aboveagaintocompletea
secondcalibrationrun.
12.AttheendofthereturnlegpresstheTripbutton
Atthispoint:
•ThetextENDalternatingwiththenew
CalibrationFactorisdisplayedatthetopofthe
page.
•Thedisplayeddistancefreezes
D12460-2
Trip
13.T oexittheSpeedRunCalibrationatanytime,
pressandholdtheSpeedandTripbuttonsatthe
sametimefor4seconds.
50i50