Chapter 2 - TECHNICAL INFORMATION
RC GROUP S.p.A I_TRP_0909_GB
16
2.3 OPTIONAL DESCRIPTION
Because any specific requirements can be identified from the design
stage, the manufacturer is ready to make the following optional
available:
- Spring vibration-damping supports: to eliminate vibrations.
- 2-way electronic valve: for condensing control.
2.4 SAFETY DEVICES
During the design and production stage, the manufacturer has installed
safety devices (active or passive) conforming to the laws and
regulations in force in the country where the machine will be used.
The various types of devices that can be installed are described below.
- Door locking switch: opens and closes the
power circuit.
- Safety valves: installed on the machine as indicated in the
diagram.
2.5 TECHNICAL DATA
The machine’s technical data are described in the enclosed
documentation (“Data Sheet” and “Dimensional Lay-out”).
Plant heat
exchanger
safety valve
Exhaust heat
exchanger
expansion
valve
compressor
liquid receiver
safety valve
safety valve
To Next Page
Loading...
General