Chapter 7 - MAINTENANCE INFORMATION
RC GROUP S.p.A I_TRP_0909_GB
42
7 MAINTENANCE INFORMATION
7.1 MAINTENANCE INFORMATION
WARNING - CAUTION
Maintenance jobs must be carried out by authorized operators, who
must ensure all the necessary safety conditions, according to the
manufacturer’s procedures.
The list of the scheduled maintenance jobs is also set out in the
“Maintenance Handbook”.
All the jobs effected must be recorded in this handbook, including any
extraordinary maintenance jobs.
7.2 SCHEDULED MAINTENANCE
Carry out all the scheduled maintenance jobs at the indicated intervals.
IMPORTANT
In case of non-compliance with the above recommendations, the
manufacturer may not be held liable in respect of any safety
requirements of the machine and, during the warranty period, the
related rights will no longer be valid.
The tables on the next pages show the months or years elapsed from
the installation, as well as the hours of operation; the earlier deadline is
to be considered.
To “read” the hours of operation, they are to be displayed on the
microprocessor’s display (see § 6.8).
To Next Page
Loading...
General