3-way Conference
Transfer redirects a connected call. The target is the number to which you want to
transfer the call.
Connect a third party into an active call
1. When one Line is active, press CONF softkey and the call is held
2. Dial the number of the third party using the same line.
When the third party answers the call, press the CONF softkey
3. The held call will be added to the active call, and the LCD will display
CONFERENCE 0:0:10 status.
Establish a conference with held line
1) when one Line is held and the other line is active;
2) Press the CONF softkey
3) press the held line button, the 3-way Conference will begin.
Do Not Disturb
Users can use the Do Not Disturb (DND) feature to block incoming calls on their
phone with a busy tone (This feature can also be set to go to voice mail or other
extension numbers).
Enable global DND
1. Press the DND softkey;
2. All enabled lines on the phone will display 8001 status
Enable DND on a single line
Press the MENU or OK button [ Function setting [ DND [ (select line) Enable
Disable DND
1. With global DND enabled, press the DND softkey to disable global DND;
--Line DND enabled, press the MENU softkey or OK button [ Function setting [
DND [(select line) Disable
Enable Auto Answer on a group
1. Press MENU softkey or the OK button [Function setting [Auto Answer
[Enable&Filter.
2. Select a Group on the list and press OK softkey .This feature will auto answer
the call from the caller in the selected group only
Device
Press MENU softkey or the OK button [Function setting [Auto Answer [De-
vice, select Speaker or Hand set to auto answer.
To Next Page
Loading...
Need help?
General
