ock Settings
1. Hour : 3
2. Minute : 25
enter save BACK
Time and Date
Time and date are displayed on the IP115/IP125 idle screen. By default the date
and time of the phone are congured manually, but users can set the phone to
obtain them from a precongured SNTP server if desired. Please contact the net-
work administrator if the time or date is incorrect.
To change Time and Date via the phone interface:
1. Press the Menu soft key [1.FUNCTION SETTINGS[
5.TIME & DATE[OK. If SNTP is selected, the phone will
automatically get the time from an NTP Server. Use the
UP and DOWN navigation keys to highlight the specic options and change
parameters. Users can set Time Zone and NTP Server respectively. By default GMT-
4:00 Eastern time is congured.
If SIP Server is chosen,the phone will automatically get the time from the SIP
Server. Press Yes soft key to save and reboot the phone.
If Manual is chosen, the time can be set manually. Use
the UP and DOWN navigation keys to highlight the
option and enter the specic date and time.
Press the OK button or the Save soft key to save the changes. Or press the Back
soft key to return to the previous screen.
VOIP Call Forwarding
Unconditional transfer
1. Press the MENU softkey or the OK button [ Function setting [ VoIP call forwarding;
2. Select Unconditional transfer, select Enable.
3. Input the destination number and all calls to this phone will be automatically transferred.
Busy Transfer
1. Press the MENU softkey or the OK button [ Function Setting[ VoIP Call
Forwarding;
2. Select Busy Transfer, select enable.
3. Input the destination number and all calls to this phone when it is in use will
be automatically trasferred.
No Answer Transfer
1. Press the MENU softkey or the OK button [ Function setting [ VoIP Call
Forwarding;
2. Select No Answer Transfer, select enable.
3. Input the destination number and all unanswered calls to this phone will be
automatically transferred.
To Next Page
Loading...
Need help?
General
