RCA IP115

58
59
59
3.2.13 LDAP Lookup for Incoming Call
Description: This setting can be used to enable calling line identication using
LDAP. When the setting is enabled, the phone performs an LDAP number search
for the incoming number and displays the name of the calling party accordingly.
Valid Values: <Enabled>, <Disabled>
Default Value: Disabled
3.2.14 LDAP Sorting Results
Description: This setting is for sorting the search results. If enabled, it will arrange
in alphabetical order the name displayed; if only has the number return, it will list
in numerical order. Valid Values: <Enabled>, <Disabled>
Default Value: Disabled
3.2.15 LDAP Lookup for PreDial/Dial
Description: This setting can be used to enable call out line identication using
LDAP. When the setting is enabled, the phone performs an LDAP number search for
PreDial or Dial status.
Valid Values: <Enabled>, <Disabled>
Default Value: Disabled
3.3 Example for Conguration
Users can use the below settings as a starting point and adjust the lter and dis-
play attributes according to their needs.
LDAP Name Filter: (&(telephoneNumber=%s)(sn=%))
LDAP Number Filter: (&(telephoneNumber=%s)(sn=*))
Server Address: 192.168.200.254 #####this setting is relate with the server
conguration.
Port: 389 #####this setting is relate with the server conguration.
Base: dc=Escene,dc=cn #####this setting is relate with the server congu-
ration. User Name: cn=manager,dc=escene,dc=cn #####this setting is relate
with the server
conguration.
Password: ***** #####this setting is relate with the server conguration.
Max.Hits: 50
LDAP Name Attributes: cn sn displayName
LDAP Number Attributes: Mobile telephoneNumber ipPhone
Protocol: Version 3 #####this setting is relate with the server
conguration.
Search Delay(ms)(0~2000): 0