Rcom INSECT MAX 70 - Dew Condensation; Humidity & Air Maintenance During Incubation

DIGITAL INCUBATOR
2. Before use
※ Evaporating pad is expendables.
13
(4) Humidity & Air Maintenance
During Incubation / Dew Condensation
Humidity & Air Maintenance During Incubation
▶ When hatching, it's recommended not to open the lid
often. If you open the lid often humidity will be rapidly
decreased and it will take a long time to regain the proper
humidity.
※ Air Controlling Lever : Outer fresh air can be flowed into
incubator inside without affecting insulation. When eggs
start hatching, open air controlling lever either fully or
half-open.
Check water level every three days during incubation, and refill when needed. You'd better to use tap water
than purified water or underground water for avoiding evaporating pad damage.
(Evaporating pad is available from Autoelex Co.,Ltd. or Rcom distributors.)
▶ This is a naturally occurring phenomenon when there is
a significant difference in temperature between inside
and outside of the incubator during incubation period.
If this occurs, water may form in inside bottom of the
incubator(bottom part).
Do not place any goods near the incubator.
Dew Condensation
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Insect Incubator Rcom Max 70 User Manual