DIGITAL INCUBATOR
Contents
1. Introduction
(1) Rcom Insect 70 Introduction
3 ~ 7
(2) Safety Precautions
(4) Name & Function of Operation Parts
(3) Identification of Parts and Composition
5. Management
(1) How to Disassemble and Clean the Incubator
20 ~ 21
2. Before use
(1) What's an Incubation Room?
8 ~ 13
(2) How to Assemble Main Body
(3) APS Assembly / Speed Control / Tube Replacement/ Storage and Cleaning
(4) Humidity & Air Maintenance During Incubation / Dew Condensation
6. Product Information
(1) How to Replace the Fuse
22 ~ 24
(2) Troubleshooting
(3) Specification
3. Incubation
14 ~ 16
(1) Incubator Installation
(2) Incubation start / Incubation Termination
4. Function Settings
16 ~ 19
(1) Incubator Initialization / Return to Factory Setting
(2)
Temperature & Humidity Setting / How to Set Abnormal High & Low Temp. Alarm
(3) How to change Centigrade & Fahrenheit / Work Automatic Pumping System by Force
Introduction
Incubation
Product Information
Function Settings
Management
Before use
How to Use Rcom Insect MAX 70
Successful hatching depends on many numbers of factors. Neither Autoelex (Rcom) nor its global
distributors and vendors can be held responsible for loss of life or property damage caused by user
neglect, alteration, modification or painting, change of use or power failure. To avoid errors, mishaps
and danger, carefully check this User Manual before initial use. Also please check the manual regularly
to ensure your operation of the machine is correct.
Caution : Caution mark against a fault that can cause damage, trouble, or failure of incubation.
Tip : References or useful suggestions in using Rcom product
Mark Explanation
Warning of actions which may be dangerous or cause damage to the incubator.
Prohibited.
Do not disassemble.
Do not touch.
It is necessary to keep.
Remove the power cord from outlet.
Ground Connection for preventing electric shock.
2
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Insect Incubator Rcom Max 70 User Manual
To Next Page
Loading...
