Rcom INSECT MAX 70 - APS Components; Basic Components

1. Introduction
DIGITAL INCUBATOR
(3) Identification of Parts
and Composition
6
Power Cord
Basic Components
View window Egg Tray
Power Cap
Main Controller
Rated voltage and product serial No. are marked inside of power cover.
Be sure to check this before connecting power.
Your Serial no. located on left-side of the main controller. Please be sure not to get dirty or break.
(ex:RCM0000000)
Nipple (1pcs.)
(Silicon Tube)
12.5cm (diameter : Ø2.6 * 3.5)
Power Cover fixing bolt
Main Controller Assembly Bolts
(1pcs.)
(2pcs.)
Humidity Pad
Expendables
ABS Divider Manual
APS Components
Silicon Tube
Pump Case
Bolt (2pcs.)
Pump Main Body
Silicon Tube and Nipple (2pcs.)
Humi Pad Clip (2pcs.)
1.5m (diameter : Ø2.6 * 3.5)
(Humidity Pad Fixing Use)
3.5cm (diameter : Ø2.6 * 3.5)
Roller
Pumping Motor
Gear
Pump Frame
Insect House (54pcs.)
Bottom body
Hatching Pad
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Insect Incubator Rcom Max 70 User Manual