EC9000i / 9100i / 9600i Series Scanner User Guide Operating the scanner
Auto-feed mode
1. Place up to 30 documents into the insertion hopper.
Note: Do not push documents past the check icon on the right side of the insertion hopper.
2. If you are required to do so, start the scanning process. For example, click Scan on your
scanning application.
Swiping magnetic stripe cards (optional)
1. Place the card in the slot on the side of the scanner with the stripe down and facing towards the
body of the scanner.
2. Swipe the card from front to back.
©2015 RDM Corporation Page 22
To Next Page
Loading...
