To Next PageTo Next Page
Need help?Do you have a question about the RDS Technology Weighlog 200 and is the answer not in the manual?
General| Brand | RDS Technology |
|---|---|
| Model | Weighlog 200 |
| Category | Accessories |
| Language | English |
Outlines the three distinct programming modes for calibration and settings.
Explains how the instrument displays weight in tons, kgs, or lbs.
Details environmental and operational conditions for accurate weighing.
Describes the correct sequence for lifting loads for accurate measurement.
Guides on choosing the correct channel for the attachment or commodity.
Explains how to choose between Static and Dynamic weighing modes.
Details the procedure for verifying the zero point before weighing.
Instructions on how to set the zero point or tare weight for the instrument.
Explains how to perform weight measurements during a lift.
Details the method for weighing by holding the load at a specific position.
Describes how to use the REF button for trailer weight sampling.
Addresses common issues with inaccurate readings and calibration adjustments.
Explains the function of the audible alarm for exceeding load limits.
Covers options for printing channel totals and grand totals.
Instructions for resetting accumulated weight totals.
How to view the current time on the instrument's display.
General procedure for inputting numerical values for settings.
Details the process for calibrating weight accuracy, including modes and routines.
Covers settings for speed compensation, live static, reference button, time/date, language, and units.
Explains how to configure printer settings, handshaking, and print headings.
Provides access to system diagnostics for troubleshooting.
