RDS Technology Weighlog 200 - Totals; Reset Individual Sub-totals; Grand Total; Display Time

WEIGHING
17
5 Totals
5.1 Reset Individual Sub-totals / Grand Total
Channels 1 to 6 can be reset
independently.
1. Select the appropriate channel.
2. Press and hold the button or the
Remote Enter button for 5 seconds.
The display will flash 5 times and then go
to zero.
If “REC” or “ROLL” print mode is enabled,
the instrument will automatically generate
a printout.
5.2 Display Time
1. Select the TOTAL channel.
2. Press and hold the ZERO button (Fig. 17).
The time displays in 24hr format (hh:mm)
Figure 16: Reset Grand Total
Figure 17: Display Time