RDS Technology Weighlog 200 User Manual

CALIBRATION
29
6.4 CAL mode 3 (Print Setup)
6.4.1 Enter CAL Mode 3
Press the button and power-on the instrument (Fig.24). Press to
select the channel.
6.4.2 Set Print Mode (channel 1)
“REC” Automatic printing (ref. section 4.4 - Fig.13)
“ROLL” Automatic printing (ref. section 4.4 - Fig.14)
“ENT” Automatic printing after each bucket weight is entered.
“OFF” No automatic printing after clearing the last load, but allows manual
printing via the button.
Press to toggle.
FUNCTION
Print Heading
Cal Factor Adjustment
Handshake (RTS/XON)
Print Mode
-
-
CH
1
2
3
4
5
TOTAL
Figure 25 : Enter CAL Mode 3

RDS Technology Weighlog 200 Specifications

General

Brand	RDS Technology
Model	Weighlog 200
Category	Accessories
Language	English