RDS Technology Weighlog 200 User Manual

OVERVIEW
6
2 The Control Switches
There are five switches on the front panel used individually or in combination
to programme, set, reset or select a function.
Channel Indicator
MANUAL WEIGHING
Press to manually
sample a weight (i.e.
alternative t
o a ref/dir.
Sensor)
Default setting = Off
ENTER /CLEAR
Pre
ss to add a bucket
weight to the channel
total.
HOLD to clear the
channel total. (If
configured, the
channel total is
automatically
printed).
Or
HOLD and power-on
to enter CAL Mode 1
ZERO BUCKET
WEIGHT
Press and hold for 3
beeps.
(Press again to
cancel)
Weigh empty
bucket then press
the REMOTE
ENTER button to
zero
Or
HOLD and power-
on to enter CAL
Mode 2
PRINTING
Channels 1-5
Press to print the
weight total for the
selected channel
Channel 6
Prints the weight
totals for channels
1-5 and the Grand
Total.
(Press ZERO to
cancel printing)
SELECT CHANNEL
Press and hold to
cycle through
channels 1-5 (sub
totals) and channel
6
(Grand Total)
Or
HOLD and power-on
to enter CAL Mode 3

RDS Technology Weighlog 200 Specifications

General

Brand	RDS Technology
Model	Weighlog 200
Category	Accessories
Language	English