Record K21 - Page 39

Troubleshooting 7
BAL_K21_EN_3V3_BLA_121-006423019 39 / 44
361 SL-RSF1 / RSF1 >
60s active
Safety strip activated or radial protective sliding wing displaced for longer
than 60 sec.
– Check that no objects are activating the safety strip and that the radial
protective sliding wing is not displaced.
362 SL-RSF2 / RSF2 >
60s active
Safety strip activated or radial protective sliding wing displaced for longer
than 60 sec.
– Check that no objects are activating the safety strip and that the radial
protective sliding wing is not displaced.
363 SL-TRKA > 60s active Safety strip drum edge activated for longer than 60 sec.
– Check that no objects are activating the safety strip.
364 SL-TRKA > 60s active Safety strip drum edge activated for longer than 60 sec.
– Check that no objects are activating the safety strip.
365 SL-VSR1 > 60s active Safety strip radial fixed wing 1 activated for longer than 60 sec.
– Check that no objects are activating the safety strip.
366 SL-VSR2 > 60s active Safety strip radial fixed wing 2 activated for longer than 60 sec.
– Check that no objects are activating the safety strip.
375 TA-BEHA > 60s active Disabled person button exterior activated longer than 60 sec.
– Check that the button is not blocked.
376 TA-BEHI > 60s active Disabled person button interior activated longer than 60 sec.
– Check that the button is not blocked.
377 TA-SRT1 > 60s active Start button 1 on revolving unit activated longer than 60 sec.
– Check that the button is not blocked.
378 TA-SRT2 > 60s active Start button 2 on revolving unit activated longer than 60 sec.
– Check that the button is not blocked.
379 Main switch TA-HAS Revolving door turned off via main power switch.
– If no hazard exists, turn main power switch on.
380 Emergency stop TA-
NHTA
Emergency stop button exterior activated.
– If no hazard exists, reset the emergency stop button.
381 Emergency stop TA-
NHTI
Emergency stop button interior activated.
– If no hazard exists, reset the emergency stop button.
395 SL-RSF1 / RSF1 error Safety strip or radial protective sliding wing has internal evaluation error.
– Press safety strip.
– If evaluation error does not disappear, contact your service centre.
396 SL-RSF2 / RSF2 error Safety strip or radial protective sliding wing has internal evaluation error.
– Press safety strip.
– If evaluation error does not disappear, contact your service centre.
397 SL-TRKA error Safety strip drum edge exterior has internal evaluation error.
– Press safety strip.
– If evaluation error does not disappear, contact your service centre.
398 SL-TRKI error Safety strip drum edge inte-rior has internal evaluation error.
– Press safety strip.
– If evaluation error does not disappear, contact your service centre.