Red Jacket Quick-Set P75S1T2 - Page 16

4” Standard Pump Installation, Operation & Service Manual Specifications
11
Table 5.- UMP Model Dimensions
Franklin Motors
(Use these
lengths for UMPs
with end view A
shown in
Figure 5)
Faradyne Motors
(Use these
lengths for UMPs
with end view B
shown in
Figure 5) Weight
UMP Model HP in. mm in. mm lb. kg
UMP33U1, AGUMP33R1 1/3 15-1/2 390 15-3/8 391 24 11
UMP75U1, AGUMP75S1 3/4 17-3/4 447 17-5/8 448 28 12.7
UMP75U3-3, AGUMP75S3-3 3/4 20 507 19-7/8 505 30.5 13.9
UMP75U17-3, AGUMP75U17-3 3/4 19-1/4 489 ---- ---- 28 12.7
UMP150U1, AGUMP150S1 1-1/2 20-1/2 519 20-5/8 524 34 15.5
X3P150U1, X3AGUMP150S1 1-1/2 21-1/4 540 21-1/2 546 35 15.8
UMP150U3-3, AGUMP150S3-3 1-1/2 22-1/4 565 22-1/4 565 34 15.5
X4P150U3, X4GUMP150S3 1-1/2 22-3/4 576 22-7/8 581 35 15.9
UMP150U17-3, AGUMP150S17-3 1-1/2 21 532 ---- ---- 31 14.1
X4P150U17, X4AGUMP150S17 1-1/2 21-1/2 547 ---- ---- 32 14.5