EPIC/SCARLET POWER LEDS
This section describes the LED functions for the camera.
LED COLOR/FLASHING DESCRIPTION
Power Status LED
(PWR)
Off No power present
Green Power present; camera on
Amber flashing Power present; 5–10 min of battery time left
Amber Power present; camera booting
Red flashing Power present; < 5 min of battery time left
Red Power present; camera off
Record Status LED
(REC)
Off No media present
Green Ready to record
Amber Finalizing
Red flashing (slow) Recording; 25% media left
Red flashing (fast) Recording; 5% media left
Red Recording
Power Status LED (PWR)
and Record Status LED (REC)
Both green flashing Firmware update in progress
Both red flashing Firmware update error
EPIC/SCARLET POWER PRIORITY
When multiple power sources are connected to the EPIC/SCARLET, power consumption is prioritized in this
sequence:
1. DC IN (AC power adapter or external battery)
2. Rear battery module batteries (lowest state of charge first)
3. REDVOLT battery in an attached DSMC Side Handle
EPIC/SCARLET POWER CONSUMPTION
The EPIC/SCARLET draws approximately 60 W when recording in 5K resolution, at 24 FPS.
Under typical conditions batteries provide the following operating time:
REDVOLT: Powers the camera and accessories for approximately 30 minutes.
REDVOLT-V™: Powers the camera and accessories for approximately 35 minutes.
REDVOLT XL: Powers the camera and accessories for approximately 90 minutes.
RED BRICK: Powers the camera and accessories for approximately 120 minutes.
C OPYRI G HT © 2017 RED.C OM , LLC 955- 0038, REV-AD| 10
RED DSMC POWER OPERATION GUIDE
To Next Page
Loading...
Need help?
General
