To Next Page

To Previous Page

RED BRICK

Figure: REDBRICK

The RED BRICK uses multiple lithium-ion rechargeable cells to provide long-term battery power to the camera for

extended shooting sessions. RED BRICK batteries can be attached to the BRAIN

or equipment using a V-Mount

battery plate and can also be used to power specific DSMC modules.

Charge the RED BRICK battery with the RED BRICK Charger. For more information, go to "RED BRICK Charger" on

page70.

NOTE: RED BRICK batteries require a RED BRICK Charger to recharge the battery.

NOTE: A DSMC2 V-Lock I/O Expander, Battery Belt Clip, RED Quickplate, RED Cradle, DSMC2 V-Lock Battery

Module, or DSMC2 V-LockBattery ModulePro is required to use a RED BRICK battery with WEAPON, SCARLET-W,

RAVEN, and EPIC-W cameras. The RED Quickplate and RED Cradle require a 2B-to-1B Power Adaptor Cable.

RED BRICK PERFORMANCE

The following table provides operational data on RED BRICK battery usage and charging times.

BATTERY NOMINAL ENERGY RUN TIME

CHARGE TIME (80%) CHARGE TIME (FULL)

RED BRICK 153 Wh 120 min 95 min 190 min

1. Approximate battery run times based on recording in 4K FF resolution at 24 FPS.

RED DSMC POWER OPERATION GUIDE

Questions and Answers:

Need help?

Do you have a question about the RED DSMC SIDE HANDLE and is the answer not in the manual?

RED DSMC SIDE HANDLE Specifications

General