PRO BATTERY MODULE (QUAD) LEDS
Each battery compartment has an LED and battery eject button to show the corresponding battery status.
COLOR/FLASHING DESCRIPTION
Off No battery
Green Battery is charged, but is not in use
Green flashing Battery in use
Amber flashing Battery has 10 minutes of run time remaining; Accessing media (when formatting)
Red Battery needs to be recharged
Red flashing Battery has five (5) minutes of run time remaining
INSERT A BATTERY
1. Align and insert the selected REDVOLT or REDVOLT XL battery.
2. Apply pressure to the battery until a click is heard, signalling the battery is properly seated.
REMOVE A BATTERY
1.
Press the Eject button(s) to release a battery from the module.
REDVOLT: Press the Eject button next to the desired battery.
REDVOLT XL: Press both Eject buttons next to the battery.
2. Remove the battery.
C OPYRI G HT © 2017 RED.C OM , LLC 955- 0038, REV-AD| 35
RED DSMC POWER OPERATION GUIDE
To Next Page
Loading...
