Need help?Do you have a question about the Redarc The Manager Alpha BMS12050 and is the answer not in the manual?
Defines signal words (WARNING, CAUTION, NOTICE) used to indicate hazard levels in safety messages.
Covers essential safety practices for grounding, AC power cords, and battery handling to prevent hazards.
Lists all the components included in the Manager Alpha kit for installation and setup.
Details the Main Unit's terminals for inputs/outputs and the protective terminal cover.
Explains the R-Bus interface, vehicle ignition input, and the Status LED indicator on the Main Unit.
Details the components of the Battery Monitor, including terminals, buttons, and sockets.
Identifies the components of the Display, including softkeys, buttons, and bezels.
Illustrates a common system configuration, showing connections between components for typical setup.
Lists the necessary tools for mounting and wiring the Manager Alpha system.
Lists the components needed for mounting, wiring, and cable management.
Guides on selecting appropriate cable sizes and types for the Main Unit connections.
Details fuse ratings and types for auxiliary and start battery connections.
Details lug requirements for M10 terminals on the Battery Monitor and cable sizing.
Specifies cable sizing for the Battery Negative connection to the auxiliary battery.
Covers common ground requirements and vehicle ignition connection based on alternator type.
Provides guidelines for mounting the Main Unit, Battery Monitor, and Display, avoiding the engine bay.
Details mounting position and orientation for the Main Unit, ensuring cable routing with drip loops.
Details mounting position, clearance for airflow, and R-Bus socket access for the Battery Monitor.
Explains how to mount the Display unit and remove its bezel, considering safety zones.
Demonstrates the process of assembling lugs with heatshrink for secure cable connections.
Details how to remove the terminal cover and connect cables to the Main Unit terminals securely.
Explains the connection procedure for the auxiliary battery cable, including fuse placement.
Covers connecting the ground cable and securing the Battery Monitor terminals, including torque specs.
Provides guidance on connecting multiple loads to the Battery Monitor's ground terminal.
Details connecting the Battery Negative cable to the auxiliary battery's negative terminal.
Details the connection of the start battery cable, including fuse placement and cable sizing.
Explains how to connect solar panels, including precautions for regulators and voltage limits.
Details connecting the vehicle ignition cable based on alternator type for triggering charging.
Explains how to connect the Battery Monitor to the Main Unit using R-Bus cables.
Details connecting the Display to the Main Unit via R-Bus cable and the function of terminating resistors.
Provides methods for strain-relief, cable management, and securing cables using ties, clips, and conduit.
Explains the importance of drip loops in cables to prevent moisture from entering components.
Emphasizes proper lug fastening for accurate readings and preventing damage to the Battery Monitor.
Details grounding, power cord usage, and connection precautions for AC mains charging.
Guides through initial display setup, battery settings configuration, and system calibration.
Explains options for screen settings, Bluetooth pairing, date/time, and regional settings on the display.
Configures DC Input Trigger based on vehicle alternator type and sets the DC Current Limit.
Explains Night Mode for fan control and Start Battery Charge/Recovery modes for auxiliary charging.
Instructions for pairing the RedVision Configurator App with the Manager via Bluetooth.
Guides on configuring the Manager via the app and setting up an Installer PIN for security.
Instructions for pairing the RedVision App with the Manager for remote monitoring and control.
Provides steps to resolve common issues, including Status LED indicators and connectivity problems.
Explains how system faults and R-Bus communication errors are indicated and how to resolve them.
Lists weight and dimensions for the Manager Alpha Main Unit models.
Details electrical parameters like current ratings, voltage ranges, and charging voltages for different battery types.
Provides general, electrical, and operational specifications for the Battery Monitor.
Lists weight, dimensions, and operating temperature for the Manager Alpha Display.
Provides contact details and terms for the limited warranty of REDARC products.
Defines signal words (WARNING, CAUTION, NOTICE) used to indicate hazard levels in safety messages.
Covers essential safety practices for grounding, AC power cords, and battery handling to prevent hazards.
Lists all the components included in the Manager Alpha kit for installation and setup.
Details the Main Unit's terminals for inputs/outputs and the protective terminal cover.
Explains the R-Bus interface, vehicle ignition input, and the Status LED indicator on the Main Unit.
Details the components of the Battery Monitor, including terminals, buttons, and sockets.
Identifies the components of the Display, including softkeys, buttons, and bezels.
Illustrates a common system configuration, showing connections between components for typical setup.
Lists the necessary tools for mounting and wiring the Manager Alpha system.
Lists the components needed for mounting, wiring, and cable management.
Guides on selecting appropriate cable sizes and types for the Main Unit connections.
Details fuse ratings and types for auxiliary and start battery connections.
Details lug requirements for M10 terminals on the Battery Monitor and cable sizing.
Specifies cable sizing for the Battery Negative connection to the auxiliary battery.
Covers common ground requirements and vehicle ignition connection based on alternator type.
Provides guidelines for mounting the Main Unit, Battery Monitor, and Display, avoiding the engine bay.
Details mounting position and orientation for the Main Unit, ensuring cable routing with drip loops.
Details mounting position, clearance for airflow, and R-Bus socket access for the Battery Monitor.
Explains how to mount the Display unit and remove its bezel, considering safety zones.
Demonstrates the process of assembling lugs with heatshrink for secure cable connections.
Details how to remove the terminal cover and connect cables to the Main Unit terminals securely.
Explains the connection procedure for the auxiliary battery cable, including fuse placement.
Covers connecting the ground cable and securing the Battery Monitor terminals, including torque specs.
Provides guidance on connecting multiple loads to the Battery Monitor's ground terminal.
Details connecting the Battery Negative cable to the auxiliary battery's negative terminal.
Details the connection of the start battery cable, including fuse placement and cable sizing.
Explains how to connect solar panels, including precautions for regulators and voltage limits.
Details connecting the vehicle ignition cable based on alternator type for triggering charging.
Explains how to connect the Battery Monitor to the Main Unit using R-Bus cables.
Details connecting the Display to the Main Unit via R-Bus cable and the function of terminating resistors.
Provides methods for strain-relief, cable management, and securing cables using ties, clips, and conduit.
Explains the importance of drip loops in cables to prevent moisture from entering components.
Emphasizes proper lug fastening for accurate readings and preventing damage to the Battery Monitor.
Details grounding, power cord usage, and connection precautions for AC mains charging.
Guides through initial display setup, battery settings configuration, and system calibration.
Explains options for screen settings, Bluetooth pairing, date/time, and regional settings on the display.
Configures DC Input Trigger based on vehicle alternator type and sets the DC Current Limit.
Explains Night Mode for fan control and Start Battery Charge/Recovery modes for auxiliary charging.
Instructions for pairing the RedVision Configurator App with the Manager via Bluetooth.
Guides on configuring the Manager via the app and setting up an Installer PIN for security.
Instructions for pairing the RedVision App with the Manager for remote monitoring and control.
Provides steps to resolve common issues, including Status LED indicators and connectivity problems.
Explains how system faults and R-Bus communication errors are indicated and how to resolve them.
Lists weight and dimensions for the Manager Alpha Main Unit models.
Details electrical parameters like current ratings, voltage ranges, and charging voltages for different battery types.
Provides general, electrical, and operational specifications for the Battery Monitor.
Lists weight, dimensions, and operating temperature for the Manager Alpha Display.
Provides contact details and terms for the limited warranty of REDARC products.
General| Brand | Redarc |
|---|---|
| Model | The Manager Alpha BMS12050 |
| Category | Battery Pack |
| Language | English |
To Next Page