64
16. Technical data
a) Vehicle
Scale .....................................................1:10
Drive .....................................................Brushless electric motor, type 3652, 2500 kV
All-wheel drive via cardan shaft
Front and rear axle differential
Chassis ................................................. Independent suspension, double wishbones
Oil-lledshockabsorberswithcoilsprings,adjustable
Adjustable front wheel toe
Adjustable front and rear wheel camber
Speed controller ...................................Continuous current 50 A
Short-term current (1 s) 300 A
BEC output 6 V/DC, 3 A
Integrated excess temperature protection
Speed ...................................................max. 55 km/h
Dimensions (L x D x H) .........................600 x 302 x 205 mm
Tiredimensions(WxØ) .......................Front: 48 x 110 mm, Rear: 56 x 110 mm
Trackwidth ...........................................Front: 250 mm, Rear: 238 mm
Wheel base ...........................................328 mm
Ground clearance .................................50 mm
Weight ..................................................2560 g (without drive battery)
Theproductdimensionsandweightmayvaryslightly.
b) Remote control system
Please observe the separately enclosed operating instructions for the remote control system
c) LiPo charger
Please observe the separately enclosed operating instructions for the LiPo charger.
d) Rechargeable battery
Suitable types ....................................... 2-cell LiPo (nominal voltage 7.4 V)
3-cell LiPo (nominal voltage 11.1 V)
6-7 cell NiMH (rated voltage 7.2 V or 8.4 V)