84
2) Press the "Go/Merge" button.
3) A dialog box will appear asking for confirmation to merge the highlighted signals. Press "Yes" to
confirm.
Note: Some information may be lost when manually merging signals. For example, if two signals that
have different information in the probe field are merged, the merged signal will only retain the
information from one of the signals.
Viewing the Signal List Full Screen
It is possible to view the signal list in full screen.
With the signal list open and displayed on the bottom half of the screen, press the full-screen
button.
Note: The spectrum or SmartBars will be hidden while the signal list is viewed full screen.
To return to the half-screen view of the signal list, press the return from full-screen button.
Clearing the Signal List
To clear a signal list:
1) Select the Clear Signal List button.
2) A dialog box will appear asking to confirm clearing the signal list. Three options are available:
a. New — Press New to clear the signal list and generate a new one.
b. Clear — Press Clear to clearing the signal list (leaving an empty signal list).
c. Cancel — Press Cancel to cancel the clear signal list operation.
To Next Page
Loading...
