85
Saving the Signal List
It is possible to save a signal list to a USB thumb drive (see pg. 100 for file system computability) to
access from a PC or from an OSCOR Blue or OSCOR Green. Signal lists are saved in .csv format and may
be opened with a spreadsheet program such as Microsoft Excel.
To Save a Signal List:
1) Ensure that a USB thumb drive is connected to one of the USB ports on the MESA.
2) Press the File Dialog button.
3) The filename that will be used for the saved file is displayed near the bottom of the file dialog
box. To change this, see File Prefix Settings on page 85.
4) Press the CSV button to save the Signal List to a file that can be opened using a spreadsheet
program or a text editor on a PC. The resulting file will use a .csv extension.
5) Press the OSCOR button to save the Signal List to a file that can be opened on an OSCOR Green
or OSCOR Blue. The resulting file will use a .signals extension.
Note: Some of the data fields which are available on the MESA, but not available on the OSCOR Blue
and Green (e.g. Latitude, Longitude, and Altitude) will be removed from this file.
To Next Page
Loading...
