ReliOn Micro - Page 74

74
Test strip problem. Contact bars on test strip may be
dirty. Incorrect test strip used. Used test strip has
been inserted. Repeat test with a new test strip.
Additional blood was applied to test strip after test
started.Teststripwasmovedduringtest.Insufcient
blood sample.
Code Number. This shows the code number currently
in the meter. The number on the screen must match
the number on the test strip bottle. If screen code
does not match the test strip code, use a new test
strip. If code still does not match, use a new bottle of
test strips or call Customer Service at 855.776.0662,
7 a.m. to 7 p.m. central time, 7 days a week.
Apply Blood Sample. The Apply Blood symbol
ashesshowingthatthemeterisreadyforthe
blood sample.