EasyManua.ls Logo

REMKO RBW PV Series User Manual

REMKO RBW PV Series
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating and
installation instructions
Read the instructions prior to performing any task!
REMKO RBW PV series
RBW 301 PV, RBW 301 PV-S
Hot-water heat pumps
0179-2021-08 Edition 3, en_GB
Instructions for Technicians
Air/water system for hot-water preparation
Question and Answer IconNeed help?

Do you have a question about the REMKO RBW PV Series and is the answer not in the manual?

REMKO RBW PV Series Specifications

General IconGeneral
BrandREMKO
ModelRBW PV Series
CategoryHeat Pump
LanguageEnglish

Summary

Safety and Usage Instructions

General Safety Notes

Read manual, heed warnings to prevent injury and material damage.

Personnel Qualifications

Specifies required qualifications for personnel performing tasks.

Dangers of Failure to Observe Safety Notes

Details risks associated with ignoring safety instructions.

Safety Notes for the Operator

Guidelines for safe operation, maintenance, and inspection.

Safety Notes for Installation, Maintenance and Inspection

Hazard prevention measures for installation and maintenance tasks.

Technical Data

Unit Data

Detailed technical specifications of the unit.

Product Data

Product data for water heaters according to EU regulation.

Unit Dimensions and Pipe Connections

Diagrams and dimensions of pipe connections for RBW 301 PV and PV-S.

Assembly

General Installation Notes

Important notes for unit installation and safety.

Unit Set-up Guidelines

Guidelines for unit placement, clearances, and installation environment.

Installation

Pressure Reducer

Requirement to install a pressure reducer in the cold water line.

Safety Valve

Guidelines for installing and using the safety valve.

Electrical Wiring

General Notes

General safety notes for electrical installation work.

Connection of the Power PCB

Details on connecting the power PCB and terminal assignments.

Commissioning

Commissioning Steps

Essential checks before switching on the heat pump.

Operation

Setting the Setpoint

Procedure for setting the desired hot water temperature.

Parameter Configuration

Reset to Factory Condition

Factory Reset Procedure

Procedure to start the reset function to factory settings.

Parameter

Parameter List (Expert Level)

List of parameters for expert level configuration.

Parameter List (Operator Level)

List of parameters for operator level configuration.

Care and Maintenance

Regular Care and Maintenance

Regular care and maintenance for trouble-free operation.

Troubleshooting and Customer Service

Troubleshooting Guide

Troubleshooting table for common faults and their remedies.

Error Codes and Meanings

Table of error codes, descriptions, causes, and remedies.

Related product manuals