POWER & FUSE INFORMATION
25
Section 5 – Power & Fuse Information
Power Inputs/Outputs:
Fuses:
Fuse Rating Location Use
2.0A/250 Power Receptacle Line Fuse (120VAC power input)
1.0A/250V F1 on PC Board Fuses 10 VAC (board logic)
500mA/250V F2 on PC Board Fuses 26 VAC (clutch/brake)
All fuses are slow blow.
Location Voltage Use
AC Receptacle
Input/Output
120VAC Main Power
Transformer Input 120VAC Transformer Power
Transformer Output ~26 VAC and ~10 VAC Transformer Outputs to PC
Board
Motor Input 120VAC (If motor relay is
enabled/closed)
Motor Drive
Brake/Clutch Input 24 VDC (When output from
PC Board is enabled)
Brake and Clutch Drive
To Next Page