Renault TRAFIC 2024 - Page 139

TRIP COMPUTER
2
Getting to know your vehicle - 137
the further you travel after pressing the
reset button.
For the first few miles after pressing
the reset key you will notice that the
range increases as you travel. This
range takes into account the average
fuel consumption since the last time
theresetbuttonwaspressed.Howev
er, average consumption can decrease
when:
– the vehicle stops accelerating;
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed);
– whendrivingfromanurbanareaon
to the open road.
Vehicle fitted with trip computer B
The functions are distributed in zones
5 and 6 .
Press switch 1 to navigate between
zones and select the functions by
pressing switches 2 or 3 (the display
depends on the vehicle equipment and
country):
a) Triplog,operatingfaultsandinfor
mation message readout;
b) journey settings:
– average energy consumption;
– current energy consumption.
– estimatedrangewithremainingen
ergy;
– distance travelled;
– average speed;
c) trip mileage recorder and average
speed;
d) Reset the tyre pressure
e) set the time;
f) distance before service;
Resetting the trip mileage recorder
andjourneyparameters(resetbut
ton)
(depending on the vehicle)
With one of the trip settings selected
as the display, press and hold switch 4
"OK" until the display resets to zero.
Automatic resetting of the journey
parameters
Resetting occurs automatically when
themaximumvalueofanyofthepara
meters is exceeded.
Interpreting some of the values
displayed after resetting
The greater the distance travelled
since the last reset, the greater the
stability and reliability of the average
energy consumption, range and speed
values.
For the first few miles after pressing
the reset key you will notice that the
range increases as you travel.