TRANSPORTING OBJECTS
4
318 - Your comfort
Luggage net
Make sure that the rod
end
1
is supported by
the metal part and not
the plastic part of the
cover.
On equipped vehicles, the luggage net
A
canbeused,whentransportingani
mals or luggage, to separate them
from the passenger section.
It can be positioned:
– behind the front seats;
– behind a rear bench seat.
Fitting the luggage net behind the
front seats
Inside the vehicle, on each side:
Upper mounting:
– lift and hold the cover
2
using a flat-
blade screwdriver to access the
mounting hole;
– fully insert the upper rod
1
of the net
into the largest section
3
of the hole;
– slide the rod into the lower section
4
of the hole.
To Next Page
Loading...
