LIGHTING AND SIGNALS
2
160 - Getting to know your vehicle
Exterior lighting and signals
Side lights
Turn the ring
2
until the symbol
is opposite the mark
3
.
This indicator light on the instrument
panel comes on.
Note: depending on the vehicle, the
sidelightscanonlybeactivatedmanu
ally when the parking brake is applied
or, depending on the vehicle, when the
gear lever is in P position.
Otherwise, the "Unavailable position
lights"messageisdisplayedonthein
strument panel to inform you that it is
not possible to activate the side lights.
Daytime running lights function
Thedaytimerunninglightsareactivat
ed automatically, without any action on
the stalk
1
, when the engine is started
andtheyaredeactivatedwhentheen
gine is switched off.
Dipped beam headlights
Before driving at night,
check that the electrical
equipment is operating
correctly and adjust the
headlight beams (if your vehicle is
not carrying its normal load). As a
general precaution, check that the
lights are not obscured (by dirt,
mud,snoworobjectsbeingtrans
ported).
Manual operation
Turn the ring
2
untilthesymbolisop
posite the mark
3
. This indicator light
on the instrument panel comes on.
Automatic operation
(depending on the vehicle)