LIGHTING AND SIGNALS
2
Getting to know your vehicle - 161
Turn the ring
2
until the AUTO symbol
is opposite the mark
3
: with the engine
on, the dipped beam headlights switch
on or off automatically according to the
exterior light level, without any action
on the stalk
1
.
Main beam headlights
With the engine running and the
dipped beam headlights lit, push stalk
1
. This indicator light on the instrument
panel comes on.
Toreturntothedippedheadlightposi
tion, pull the stalk
1
towards you
again.
"Raiselightsduringdriving"func
tion
When the main beam headlights are
activated,the"Raiselightsduringdri
ving" function improves driver visibility
by automatically raising the dipped
beam headlight and the main beam
headlights.
During deactivation of the main beam
headlights,thedippedbeamhead
lights return to their original position.
Automatic main beam headlights
Usingaportablenaviga
tion system at night in
thewindscreenareabe
lowthecameramaydis
turbtheoperationofthe"auto
maticmainbeamheadlights"sys
tem(riskofreflectiononthewind
screen).
If the vehicle is parked
on the hard shoulder
with the tailgate open,
the rear lights may be
obscured. You should make other
road users aware of your vehicle
byusingawarningtriangleoroth
er equipment specified by the
road traffic regulations of the
country you are driving in.
The system may encounter
difficulties under certain
conditions, including:
– extreme weather conditions
(rain, snow, fog, etc.);
– obstructioninfrontofthewind
screen or camera;
– when a following or oncoming
vehiclehasweakorhiddenlight
ing;
– incorrect settings for the front
headlights;
– reflecting systems;
– ...