INSTALLATION AND USE OF ACCESSORIES
6
366 - Practical advice
Installation and use of accessories: important recommendations
Electrical and electronic accessories
Before installing this type of accessory (particularly for transmitters/receivers: frequency bandwidth, power level,
position of the aerial, etc.), make sure it is compatible with your vehicle. Contact an approved dealer.
Before connecting an accessory to a socket, ensure that it does not exceed the maximum power authorised for
the socket 🡺0, 🡺303. Fire hazard.
Noworkmaybecarriedoutonthevehicle’selectricaland/orelectroniccircuits,exceptbyaqualifiedprofessional.Infact,
an incorrect connection and/or the installation of electrical/electronic accessories not approved by the manufacturer could
lead to:
– damage to the electrical and/or electronic equipment;
– damage to the components connected to it;
– the collection and use of vehicle data;
– an invasion of privacy (modification, deletion or unwarranted access to personal data);
– cancellation of the authorisation for entry into service.
Risk of serious accidents.
Risk of invasion of privacy.
Ifyouhaveelectricalequipmentfittedinfuture,makesurethatyouarenotifiedoftheratingandpositionofthecorrespond
ing fuse.
Using the diagnostic socket
Theuseofelectronicaccessoriesonthediagnosticsocketmaycauseseriousdisturbancetothevehicle'selectronicsys
tems and/or cause invasion of privacy (modification, deletion or unwarranted access to personal data).
Foryoursafety,werecommendthatyouonlyuseelectronicaccessoriesapprovedbythemanufacturer:consultanap
proved dealer.
Risk of serious accidents.
Risk of invasion of privacy.