Renault TRAFIC 2024 - Additional Driving Aid Functions

ADDITIONAL DRIVING AID FUNCTIONS
3
214 - Driving
My Safety
The "My Safety" function can be used
to deactivate or activate a set of driver
assistance functions simultaneously.
Depending on the vehicle, you can
configure the My Safety function from
themultimediascreenorfromthein
strument panel by selecting the driving
aid functions to be switched off as a
group.
Operation
"All On" mode
Depending on the vehicle, this mode
includesthefollowingdrivingassis
tance functions:
– overspeed sound alert 🡺242;
– driver vigilance warning 🡺240;
– blind spot warning 🡺223;
– lane departure warning 🡺216.
When the "All On" mode is activated:
the indicator light on switch 1 lights up
and the "My Safety All ON selected"
messageisdisplayedontheinstru
ment panel to confirm activation. The
driving aids that are available in the
mode are activated.
"Custom" mode
From this mode you can deactivate
or reactivate certain driving aids that
areavailableinthe"AllOn"modepre
viouslyconfiguredusingthe"MySafe
ty Custom" setting.
With the ignition on, press button 1
twice in succession to activate the
"Custom" mode.
The first time you press it, the "Press
again for My Safety Perso" message is
displayed on the instrument panel. On
the second press, the indicator light on
the switch 1 goes out. The "Custom"
modeisactivated.The"MySafetyPer
so selected" message is displayed on
the instrument panel.
To switch back to "All On" mode, press
once on button 1 and the indicator
light on switch 1 lights up.
Depending on the vehicle,
depending on the length of
time following the last time
the engine was stopped, the "All
On" mode is reactivated:
– when the vehicle is unlocked;
or
– when a door is opened;
or
– when the engine is restarted.