REAR SEATS
2
58 - Getting to know your vehicle
Rear headrests
The headrest is a safety
component; check that it
isfittedandinthecor
rect position.
To remove the headrest
Press button
1
and lift the headrest to
releaseit(tilttheseatbackifneces
sary).
To refit the headrest
Insert the headrest rods into the holes
(tilt the seatback if necessary). Lower
the headrest as far as it will go, then lift
until it locks into place. Check that
each rod
2
is locked on the seatback.
Rear bench seats
Functions
For safety reasons, carry
out any adjustments
whilethevehicleissta
tionary.
Depending on the vehicle, there may
be two rear bench seats: bench seat
2
(second row of seats) and bench seat
1
(third row of seats).
Bench seat
2
Ensure that the bench
seats are locked in place
correctly when refitting
them.
Check that the side seat belts are
locked in their unit correctly.