LIGHTING AND SIGNALS
2
Getting to know your vehicle - 165
mainlituntilthevehiclespeedex
ceeds approximately 6 mph (10 km/h).
Headlight beam adjustment
On vehicles fitted with this function,
control
A
allows you to adjust the
height of the beams according to the
load.
With the dipped beam headlights on,
press the top
1
of control
A
to raise
theheadlightbeamsorpressthebot
tom
2
to lower them.
Load status
Control
position
Driver only or with pas
senger
0
Load status
Control
position
All seats occupied 1
Driver with passengers
and luggage (or load)
reaching the maximum
permissible all-up
weight
2
Driver without a pas
senger and with lug
gage (or load) reaching
the maximum autho
rised load weight
3 or 4
Thetablebelowgivessomeexam
ples. In all cases, adjust the control
A
according to the vehicle load so
that the road can be seen and other
drivers are not dazzled.