SPEED LIMITER
3
250 - Driving
Introduction
Youcanlinkthespeedlim
itertothe"Roadsigndetec
tion" function. 🡺242.
The speed limiter function helps you
stay within the driving speed limit that
you choose, known as the limit
speed.
The speed limiter is linked with the "Hill
Descent Control" function, enabling
use of the braking system to optimise
downhill speed limitation.
Controls
1.
Speed limiter On/Off switch.
2.
Cruise control On/Off switch.
3.
Switch to activate and decrease the
limit speed (SET/-).
4.
Switch to activate and increase the
limit speed or to set the stored limit
speed (RES/+).
5.
Puts the function on standby and
stores the limited speed (0).
Temporarily not available
Thesystemcontrolsaccel
eration and deceleration of
your vehicle using the engine and
brakingsystem.Thesystemacti
vatesthebrakesinordertomain
tainthesetspeed,thesystemap
plies limited braking. In the event
of a steep descent, for example in
amountainousarea,youmustse
lect a lower gear to benefit from
engine braking.
To reduce the load imposed on
the braking system and to prevent
the brakes from overheating, the
speed limiter function may be
temporarily interrupted and the
"Check Speed Limiter" message
mayappear.Themessagedisap
pears when the function becomes
available again.
If the message remains, contact
an approved dealer.