INFORMATION ABOUT THE VEHICLE
7
Technical specifications - 375
Vehicle identification plates
Vehicle identification plate
The information shown on the vehi
cle identification plate should be
quoted on all correspondence or or
ders.
The presence and location of the in
formation depends on the vehicle.
Manufacturer's plate: details
Manufacturer's plate
A
1.
Manufacturer name.
2.
EC design number or approval
number.
3.
Identification number.
B.
Depending on the vehicle, this
information is also provided on the
marking.
4.
MMAC (Maximum permissible all-
up weight).
5.
MTR (Gross Train Weight: vehicle
fully loaded, with trailer).
6.
MMTA (Maximum Permissible
Weight) front axle.
7.
MMTA rear axle.
8.
Reserved for related or additional
entries.
9.
Diesel exhaust emissions.
Dependingonthevehicle,thisinfor
mation may not be indicated on the
manufacturer's plate but on the engine
smoke opacity label 🡺192.
10.
Paint reference (colour code).
To Next Page
Loading...
