TRANSPORTING OBJECTS
4
Your comfort - 319
Lower mounting:
– attach the net strap hook
5
onto the
ring
7
at the base of the bench seat;
– adjust the net strap so that it is taut.
Removal
Loosenthestrapbyliftingtheadjust
ment device
6
upwards. Detach the
belts.
Fitting the luggage net
A
behind
the rear seats
Make sure that the rod
end
1
is supported by
the metal part and not
the plastic part of the
cover.
Inside the vehicle, on each side:
Upper mounting:
– lift and hold the cover
2
using a flat-
blade screwdriver to access the
mounting hole;
– fully insert the upper rod
1
of the net
into the largest section
3
of the hole;
– slide the rod into the lower section
4
of the hole.
To Next Page
Loading...
