TYRE PRESSURE MONITORING SYSTEM
3
206 - Driving
Resetting the tyre pressure reference value: table
The table below shows the possible messages related to the tyre resetting procedure.
Steps Displays
(depending on the ve
hicle)
Messages Readings
1
Tyre pressure init.
long press
Withtheignitiononandthevehiclestationary,startresettingthepres
sure of all four tyres by pressing and holding the
4
OK switch.
2
Learning Tyre
Pressures
The "---" symbols in front of each wheel will flash to indicate that the
system has registered the tyre pressure reset for all four wheels.
3
The""symbolsinfrontofeachwheelwillremainlit.Thissystemre
sets the tyre pressure of all four tyres. You can now drive.
Note: during the reset, tyre pressure monitoring remains in operation.
4 Thepressurevalueofthefourtyresisdisplayed:theresettingproce
dure is complete and successful.