WIPER BLADES: REPLACEMENT
6
Practical advice - 361
Position the blade
3
of the wiper arm
1
at an angle of 30°.
Slide the blade along the arm until it
clips on. Check that it is correctly
locked. Lower the windscreen wiper
arm carefully.
Withtheignitionon,returnthewind
screen wiper stalk to the stop position.
Check the condition of the
wiperblades.Youarere
sponsible for their service
life:
– clean the blades, windscreen
and rear screen regularly with
soapy water;
– donotusethemwhenthewind
screen or rear screen is dry;
– free them from the windscreen
or rear screen when they have
not been used for a long time.
Rear screen wiper blade on rear
hinged doors
– Lift the wiper arm
4
;
– pivot the blade
5
until you meet
some resistance;
– pullthebladetoreleaseit(move
ment
A
).
Rearscreenwiperbladeontail
gate
– Lift the wiper arm
6
;
– pull the tab
8
(movement
B
) and
push the blade
7
upwards.