Renault TRAFIC 2024 - Page 62

REAR SEATS
2
60 - Getting to know your vehicle
To fold it down
– Pull the seatback unlocking strap 7 ;
– fold down the seatback onto the seat
base.
When moving the rear
bench seat, check that
thebenchseatanchor
age points are clean
(they should be free from grit,
cloths or any other item which
may prevent the bench seat from
locking securely).
To fold down
(depending on the vehicle)
– Hold the bars 8 andbringthemto
gether simultaneously (movement B );
– tilt the seat unit forwards until it
locks;
– press the top of the seat base (at C )
andlocktheseatinpositionbypush
ingthelockinglevers 9 ;
– ensure it is correctly locked in place.
Removal/refitting of bench
seats 1 and 2
(depending on the vehicle)
Ensure that the bench
seats are locked in place
correctly when refitting
them.
Check that the side seat belts are
locked in their unit correctly.
The rear bench seats
must be placed on their
original anchorage
points.
Driving with the "bench seat in a
rear-facing position" is prohibited.
For safety reasons, carry
out any adjustments
whilethevehicleissta
tionary.
It is prohibited to swap
bench seats 1 and 2 .